SOLE DETAILS
| S. No. | SINGLE-DENSITY | RECOMMENDED USE | SOLE |
| PU | It’s a very light material which guarantees high levels of comfort. It has good resistance to chemicals and hydrocarbon, but no resistance to strong acids. The temperature tolerance lies between -10/-20 and +130/140 degree. The softness of the material gives the sole a good ground adhesion, so that its slip resistance is comparable to that of TPU and rubber. | Indoors or in non-extreme work environments 2. Abrasion : Dry-25,600 cycles and Wet-12,800 cycles |
 |
|---|---|---|---|
| PU/RUBBER | (Generally soles obtained through injection molding). This type of footwear maintains the properties of rubber in the outsole, whereas the midsole is made of PU, so allowing to reduce the weight. PU in this case is the weak spot in the most extreme situations, where rubber has better performances. | Indoors and outdoors, where there is a risk of contact with hydrocarbon, chemicals or acids. If they are marked “HRO”, they are also suited for working on hot surfaces. |  |
| PU/TPU | TPU is a very sturdy and flexible material. It has very good performances: excellent abrasion resistance and a slip resistance comparable to that of single-density PU and rubber; flexibility. In average TPU is more durable than PU and has a better protection from low temperatures (between –5 and -20 degrees). The resistance to high temperatures is not very high: maximum 100 degrees. | In and outdoors or in cold places; not recommended for works on hot surfaces. |  |
| PU/PU | The sole consists of two layers of PU with different densities. It has good resistance to chemicals and hydrocarbon, but no resistance to strong acids. The temperature tolerance lies between -10/-20 and +120/150 degree. The soft PU midsole guarantees good shock absorption and comfort. | Indoors and outdoors, not recommended where there is a chemical risk. |  |
UNMATCHED FEATURES
| 1. | Upper | 100% Genuine leather breathable and skin friendly, exclusively made in our own state of the art tannery. 1. Thickness : 2.0 + 0.2 mm 2. Tear Strength : 120 N 3. Flexing Resistance : 1,50,000 cycles |
|---|---|---|
| 2. | Lining | Imported 280 GSM non woven felt for vamp & Imported 150GSM Cambrelle type with foam/ functional breathable textile for quarter. 1. Tear Strength 15 N 2. Abrasion : Dry-25,600 cycles and Wet-12,800 cycles |
| 3. | Toe Cap | Steel Toe Cap- Imported EN marked powder coated heat treated rust resistant, smooth edges tested for impact resistance of 200 J. Polymer Toe Cap (FRP Toe)* - Imported polymer 30% lighter, rust resistant, smooth edges tested for impact resistance of 200 J. |
| 4. | Insole | 2.00 mm thick non woven Anti static Insole tested for no surface tearing till 400 cycles. |
| 5. | In-socks | Min 3.00mm molded arch supported EVA/PU in-socks |
| 6. | Laces & Thread | Nylon, twisted and resistant to appropriate breaking load. |
| 7. | Outsole | Directly Injected Double Density PU/PU, PU/TPU, PU/Rubber & EVA/Rubber out sole antiskid, antistatic, oil & fuel resistance. Our Shoes made on Direct Vulcanized rubber sole can withstand a temp. up to 300C. |
| 8. | Marking |  |